FQ2
De nieuwe norm voor beeldinspectie en codeverificatie
De FQ2-familie biedt geavanceerde inspectie en het uitlezen en verifiëren van codes, zoals dat eerder uitsluitend mogelijk was met duurdere vision systemen. Dankzij meer dan 100 camera-opties, biedt de FQ2 gebruikers een optimale flexibiliteit om toepassingen uit te voeren. Of u nu een hoge resolutie wenst, codes wilt uitlezen, een geïntegreerde verlichting nodig heeft of op zoek bent naar een voordelige oplossing voor een eenvoudige toepassing, u vindt altijd een FQ2 die voldoet aan uw behoeften.
- Krachtige functionaliteit met veelzijdig assortiment
- Kristalheldere beeldkwaliteit
- Alles-in-één-behuizing
- Eenvoudig zoeken met Vorm zoeken II
- Direct Part Marking (DPM)
- Unieke OCR-technologie
- Codeverificatie
- Geavanceerde inspectie
Specificaties & bestelinfo
System Configuration
Ordering Information
Sensor
Inspection model
FQ2-S1 Series [Single-function Type]
FQ2-S2 Series [Standard Type]
FQ2-S3 Series [High-resolution Type]
Refer to Optical Chart for C-mount Camera FQ2-S3⬜-13⬜/-S4⬜-13⬜ |
Inspection/ID model
FQ2-S4 Series [Standard Type]
[High-resolution Type]
Refer to Optical Chart for C-mount Camera FQ2-S3⬜-13⬜/-S4⬜-13⬜ |
ID Model
FQ2-CH Series [Optical Character Recognition Sensor]
FQ-CR1 Series [Multi Code Reader]
FQ-CR2 Series [2D Code Reader]
Field of vision/Installation distance (Unit: mm)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Optical Chart for C-mount Camera FQ2-S3 ⬜ -13 ⬜ /-S4 ⬜ -13 ⬜
High-resolution, Low-distortion Lenses 3Z4S-LE SV- ⬜⬜⬜⬜ H
Touch Finder
Cables
Sensor Data Unit (FQ2-S3/S4/CH only)
|
|||
|
|||
Cables for Sensor Data Unit
|
|||
Parallel Cable for FQ-SDU11 |
|
||
Parallel Cable for FQ-SDU21 |
|
||
RS-232C Cable for FQ-SDU21 |
|
||
External Lighting
Accessories
|
Mounting Bracket2 |
||
Mounting Base for C-mount type3 |
|||
|
Polarizing Filter Attachment1 |
||
|
|||
|
(for AC/DC/battery model)3 |
||
|
|||
|
Touch Pen4 |
||
|
|||
|
*3. AC Adapters for Touch Finder with DC/AC/Battery Power Supply.Select the model for the country in which the Touch Finder will be used.
*4. Enclosed with Touch Finder.
Industrial Switching Hubs (Recommended)
|
||||
|
||||
Lenses for C-mount Camera. Refer to Optical Chart for C-mount Camera FQ2-S3⬜-13⬜/-S4⬜-13⬜ for selection of a lens.
High-resolution, Low-distortion Lenses
|
|||||||||
Extension Tubes
Note: Do not use the 0.5-mm, 1.0-mm, and 2.0-mm Extension Tubes attached to each other. Since these Extension Tubes are placed over the threaded section of the Lens or other Extension Tube, the connection may loosen when more than one 0.5-mm, 1.0-mm or 2.0-mm Extension Tube are used together.
Note: Reinforcement is required to protect against vibration when Extension Tubes exceeding 30 mm are used.
Ratings and Performance
Sensor
Inspection Model FQ2-S1/S2/S3 Series
Refer to Ordering Information on p.19. (Tolerance (field of vision): ± 10% max.) |
Select a lens according to the field of vision |
||||||
Search, shape search II, sensitive search, area, color data, edge position, edge pitch, edge width, and labeling |
|||||||
Supported (360º Model position compensation, Edge position compensation) |
|||||||
High dynamic range (HDR), image adjustment (Color Gray Filter, Weak smoothing, Strong smoothing, Dilate, Erosion, Median, Extract edges, Extract horizontal edges, Extract vertical edges, Enhance edges, Background suppression), polarizing filter (attachment), and white balance (Sensors with Color Cameras only) |
|||||||
In Sensor: 1,000 items (If a Touch Finder is used, results can be saved up to the capacity of an SD card.) |
|||||||
In Sensor: 20 images (If a Touch Finder is used, images can be saved up to the capacity of an SD card.) |
|||||||
Math (arithmetic, calculation functions, trigonometric functions, and logic functions) |
|||||||
External trigger (single or continuous) Communications trigger (Ethernet TCP no-protocol, Ethernet UDP no-protocol, Ethernet FINS/TCP no-protocol, EtherNet/IP, PLC Link, or PROFINET) |
|||||||
The assignments of the three output signals (OUT0 to OUT2) can be changed to the individual judgements of the inspection items, the image input ready output (READY), or the external lighting timing output (STGOUT). |
|||||||
Ethernet TCP no-protocol, Ethernet UDP no-protocol, Ethernet FINS/TCP no-protocol, EtherNet/IP, PLC Link, or PROFINET |
|||||||
Possible by connecting FQ-SDU1_ Sensor Data Unit. 11 inputs and 24 outputs |
|||||||
Possible by connecting FQ-SDU2_ Sensor Data Unit. 8 inputs and 7 outputs |
|||||||
150 m/s2 3 times each in 6 direction (up, down, right, left, forward, and backward) |
|||||||
IEC 60529 IP67 (Except when Polarizing Filter Attachment is mounted |
|||||||
Polarizing Filter Attachment: PBT, PC |
|||||||
Polarizing Filter Attachment (FQ-XF1) (1) |
|||||||
Class 2(Applicable standards: IEC 60825-1:1993 +A1:1997 +A2:2001, |
|||||||
Inspection/ID Model FQ2-S4 Series
Refer to Ordering Information on p.19. (Tolerance (field of vision): ± 10% max.) |
Select a lens according to the field of vision |
||||||
Search, shape search II, sensitive search, area, color data, edge position, edge pitch, edge width, labeling, OCR4, Bar code5, 2D-code2, 2D-code (DMP)6, and Model dictionary |
|||||||
Supported (360º Model position compensation, Edge position compensation) |
|||||||
High dynamic range (HDR), image adjustment (Color Gray Filter, Weak smoothing, Strong smoothing, Dilate, Erosion, Median, Extract edges, Extract horizontal edges, Extract vertical edges, Enhance edges, Background suppression), polarizing filter (attachment), and white balance (Sensors with Color Cameras only) |
|||||||
In Sensor: 1,000 items (If a Touch Finder is used, results can be saved up to the capacity of an SD card.) |
|||||||
In Sensor: 20 images (If a Touch Finder is used, images can be saved up to the capacity of an SD card.) |
|||||||
Math (arithmetic, calculation functions, trigonometric functions, and logic functions) |
|||||||
External trigger (single or continuous) Communications trigger (Ethernet TCP no-protocol, Ethernet UDP no-protocol, Ethernet FINS/TCP no-protocol, EtherNet/IP, PLC Link , or PROFINET) |
|||||||
The assignments of the three output signals (OUT0 to OUT2) can be changed to the individual judgements of the inspection items, the image input ready output (READY), or the external lighting timing output (STGOUT). |
|||||||
Ethernet TCP no-protocol, Ethernet UDP no-protocol, Ethernet FINS/TCP no-protocol, EtherNet/IP, PLC Link, or PROFINET |
|||||||
Possible by connecting FQ-SDU1_ Sensor Data Unit. 11 inputs and 24 outputs |
|||||||
Possible by connecting FQ-SDU2_ Sensor Data Unit. 8 inputs and 7 outputs |
|||||||
150 m/s2 3 times each in 6 direction (up, down, right, left, forward, and backward) |
|||||||
IEC 60529 IP67 (Except when Polarizing Filter Attachment is mounted |
|||||||
Polarizing Filter Attachment: PBT, PC |
|||||||
Polarizing Filter Attachment (FQ-XF1) (1) |
|||||||
Class 2(Applicable standards: IEC 60825-1:1993 +A1:1997 +A2:2001, |
|||||||
ID Model FQ2-CH, FQ-CR1/CR2 Series
Refer to Ordering Information (Tolerance (field of vision): ± 10% max.) |
||||
2D Code (Data Matrix(EC200), QR Code, MicroQR Code, PDF417, MicroPDF417, GS1-Data Matrix) |
||||
Bar Code (JAN/EAN/UPC, Code39, Codabar (NW-7), ITF (Interleaved 2 of 5), Code 93, Code128/GS1-128, GS1 DataBar* (Truncated, Stacked, Omnidirectional, Stacked Omnidirectional, Limited, Expanded, Expanded Stacked), Pharmacode, GS1-128 Composite Code (CC-A, CC-B, CC-C) |
||||
Weak smoothing, Strong smoothing, Dilate, Erosion, Median, Extract edges, Extract horizontal edges, Extract vertical edges, Enhance edges, Background suppression |
Filter function (Smooth, Dilate, Erosion, Median), Code Error Correction Position Display |
|||
Supported (360º Model position compensation, Edge position compensation) |
||||
In Sensor: 1,000 items (If a Touch Finder is used, results can be saved up to the capacity of an SD card.) |
||||
In Sensor: 20 images (If a Touch Finder is used, images can be saved up to the capacity of an SD card.) |
||||
Math (arithmetic, calculation functions, trigonometric functions, and logic functions) |
||||
External trigger (single or continuous) Communications trigger (Ethernet TCP no-protocol, Ethernet UDP no-protocol, Ethernet FINS/TCP no-protocol, EtherNet/IP, PLC Link, or PROFINET) |
||||
The assignments of the three output signals (OUT0 to OUT2) can be changed to the individual judgements of the inspection items, the image input ready output (READY), or the external lighting timing output (STGOUT). |
Note: The three output signals can be allocated for the judgements of individual inspection items. |
|||
Ethernet TCP no-protocol, Ethernet UDP no-protocol, Ethernet FINS/TCP no-protocol, |
||||
Possible by connecting FQ-SDU1_ Sensor Data Unit. 11 inputs and 24 outputs |
||||
Possible by connecting FQ-SDU2_ Sensor Data Unit. 8 inputs and 7 outputs |
||||
150 m/s2 3 times each in 6 direction (up, down, right, left, forward, and backward) |
||||
IEC 60529 IP67 (Except when Polarizing Filter Attachment is mounted or connector cap is removed.) |
||||
Sensor: PBT, PC, SUS, Mounting Bracket: PBT, Polarizing Filter Attachment: PBT, PC Ethernet connector: Oil-resistance vinyl compound, I/O connector: Lead-free heat-resistant PVC |
||||
Narrow View/Standard View: Approx.160 g Wide View: Approx. 150 g |
||||
Mounting Bracket (FQ-XL)(1), Polarizing Filter Attachment (FQ-XF1) (1), Instruction Manual, Quick Startup Guide, Member Registration Sheet, Warning Label |
||||
Class 2(Applicable standards: IEC 60825-1:1993 +A1:1997 +A2:2001,EN 60825-1:1994 +A1:2002 +A2:2001, and JIS C 6802:2005) |
||||
Touch Finder
Number of sensors that can be recognized (switched): 32 max. number or sensor that can displayed on monitor: 8 max. |
||||
Last result display, Last NG display, trend monitor, histograms |
||||
English, German, French, Italian, Spanish, Traditional Chinese, Simplified Chinese, Korean, Japanese |
||||
Life expectancy7 |
||||
Life expectancy8 |
||||
DC power connection: 21.6 to 26.4 VDC (including ripple) AC adapter (manufactured by Sino-American Japan Co., Ltd) connection: 100 to 240 VAC, 50/60 Hz |
||||
Continuous operation on Battery9 |
||||
DC power connection: 0.2 A max. |
||||
Operating: 0 to 50ºC when mounted to DIN Track |
||||
10 to 150 Hz, single amplitude: 0.35 mm, X/Y/Z directions 8 min each, 10 times |
||||
150 m/s2 3 times each in 6 direction (up, down, right, left, forward, and backward) |
||||
IEC 60529 IP20 (when SD card cover, connector cap, or harness is attached) |
||||
Sensor Data Units (FQ2-S3/S4/CH only)
Battery
Charged in Touch Finder (FQ2-D31). AC adapter (FQ-AC ⬜ ) is required. |
|
Charging time10 |
|
Usage time1 |
|
Battery backup life11 |
|
System Requirements for PC tool for FQ
The following Personal Computer system is required to use the software.
Microsoft Windows XP Home Edition/Professional SP2 or higher (32-bit version) Microsoft Windows 7 Home Premium or higher (32-bit/64-bit version) |
|
500 MB min. available space12 |
|
4. The types of characters to be read are the same as those of FQ2-CH Optical Character Recognition Sensor.
7. This is a guideline for the time required for the brightness to diminish to half the initial brightness at room temperature and humidity. The life of the backlight is greatly affected by the ambient temperature and humidity and will be shorter at lower or higher temperatures.
8. This value is only a guideline. No guarantee is implied. The value will be affected by operating conditions.
9. This value is only a guideline. No guarantee is implied. The value will be affected by the operating environment and operating conditions.
10. This value is only a guideline. No guarantee is implied. The value will be affected by operating conditions
*3. AC Adapters for Touch Finder with DC/AC/Battery Power Supply.Select the model for the country in which the Touch Finder will be used.
4. The types of characters to be read are the same as those of FQ2-CH Optical Character Recognition Sensor.
7. This is a guideline for the time required for the brightness to diminish to half the initial brightness at room temperature and humidity. The life of the backlight is greatly affected by the ambient temperature and humidity and will be shorter at lower or higher temperatures.
8. This value is only a guideline. No guarantee is implied. The value will be affected by operating conditions.
9. This value is only a guideline. No guarantee is implied. The value will be affected by the operating environment and operating conditions.
10. This value is only a guideline. No guarantee is implied. The value will be affected by operating conditions
Hoe kunnen we u helpen?
Als u een vraag hebt of een offerte wilt aanvragen, kunt u contact met ons opnemen of een verzoek indienen.
Neem contact met mij op FQ2
Dank u wel voor het insturen van uw verzoek. Wij informeren u zo snel als mogelijk.
Wij ondervinden technische problemen. Uw formulierinzending is niet gelukt. Onze verontschuldigingen hiervoor, probeer het later nog een keer. Details: [details]
DownloadOfferte voor FQ2
Met dit formulier kunt u een prijsaanvraag doen voor de producten van uw keuze. Vul alstublieft alle velden in die gemarkeerd zijn met *. Uw persoonlijke gegevens behandelen wij uiteraard volstrekt vertrouwelijk.
Dank u wel voor uw aanvraag. Wij zenden u de gewenste informatie zo snel als mogelijk.
Wij ondervinden technische problemen. Uw formulierinzending is niet gelukt. Onze verontschuldigingen hiervoor, probeer het later nog een keer. Details: [details]
Download