NX-ID5142-5
16 Digital Inputs, Standard speed, NPN/PNP 24 VDC, MIL20 connector (not included), 30 mm wide
Specificaties
| I/O system | NX I/O Bus |
| Type of module | Digital I/O |
| Number of digital inputs | 16 |
| Digital input type | PNP/NPN |
| Permitted voltage at input | 15-28.8 V |
| OFF/ON delay | 0.02-0.4 ms |
| Number of digital outputs | 0 |
| Digital output type | None |
| Short-circuit protected outputs | |
| Connection method | 1-wire |
| Signal processing | Free running, Standard speed, Synchronous |
| IO-Link master | |
| I/O connection type | MIL (plug not included) |
| Number of I/O connectors | 1 |
| Detachable I/O connector | |
| Suitable for safety functions | |
| SIL according to IEC 61508 | None |
| Communication port(s) | None |
| Number of IOV (V+) terminals | 0 |
| Number of IOG (V-) terminals | 0 |
| Number of COM terminals | 2 |
| Degree of protection (IP) | IP20 |
| Product Height (unpacked) | 100 mm |
| Product Width (unpacked) | 30 mm |
| Product Depth (unpacked) | 89.52 mm |
| Product Weight (unpacked) | 85 g |
Accessoires
| G70V-SID16P | Omron, G70V I/O-relaisterminal, PLC Input, 16 wisselcontacten, 50 mA, NPN, Push-in Plus (incl. Relais) |
|
|
| G70V-SID16P-1 | Omron, G70V I/O-relaisterminal, PLC Input, 16 wisselcontacten, 50 mA, PNP, Push-in Plus (incl. Relais) |
|
|
| XW2D-20G6 | Slimline 20 punts klemmenstrook voor DIN-railmontage M3, 20 punts MIL connector |
|
|
| XW2K-20G-T | Interfacebedradingssysteem voor algemeen gebruik met push-in plus-technologie, 20-punts MIL-connector, ingang/uitgang, 1 A, NPN/PNP, 125 VAC, 30 VDC, DIN-rail horizontale en verticale montage |
|
|
| XW2Z-0100DD-L | I/O kabel, 1 m, MIL20 naar MIL20, recht over |
|
|
| XW2Z-0100DL-L | I/O kabel, 1 m, MIL20 naar open einden |
|
|
| XW2Z-0200DD-L | I/O kabel, 2 m, MIL20 naar MIL20, recht over |
|
|
| XW2Z-0200DL-L | I/O kabel, 2 m, MIL20 naar open einden |
|
|
| XW2Z-0500DL-L | I/O kabel, 5 m, MIL20 naar open einden |
|
|
| XW2Z-100X | 1 m kabel tussen klemmenstrook XW2B-20G4/G5 en CJ1W-NCx14 / x34 |
|
|
| XW2Z-200X | 2 m kabel tussen klemmenstrook XW2B-20G4/G5 en CJ1W-NCx14 / x34 |
|
|
| XW2Z-RO50C | Kabel 20 pin MIL naar XW2*-20G* of 1 x G70A-ZOC16-3, 0.5m |
|
Downloads
