NX-ID5142-5
16 Digital Inputs, Standard speed, NPN/PNP 24 VDC, MIL20 connector (not included), 30 mm wide
Spécifications
I/O system | NX I/O Bus |
Type of module | Digital I/O |
Number of digital inputs | 16 |
Digital input type | PNP/NPN |
Permitted voltage at input | 15-28.8 V |
OFF/ON delay | 0.02-0.4 ms |
Number of digital outputs | 0 |
Digital output type | None |
Short-circuit protected outputs | |
Connection method | 1-wire |
Signal processing | Free running, Standard speed, Synchronous |
IO-Link master | |
I/O connection type | MIL (plug not included) |
Number of I/O connectors | 1 |
Detachable I/O connector | |
Suitable for safety functions | |
SIL according to IEC 61508 | None |
Communication port(s) | None |
Number of IOV (V+) terminals | 0 |
Number of IOG (V-) terminals | 0 |
Number of COM terminals | 2 |
Degree of protection (IP) | IP20 |
Product Height (unpacked) | 100 mm |
Product Width (unpacked) | 30 mm |
Product Depth (unpacked) | 89.52 mm |
Product Weight (unpacked) | 85 g |
Accessoires
G70V-SID16P | Bloc relais, entrée PLC, 16 canaux, NPN, Push-in |
|
|
G70V-SID16P-1 | Bloc relais d'inferface, entrée PLC, 16 canaux, PNP, Push-In |
|
|
XW2D-20G6 | Bornier 20 points pour montage rail din, vis m3, version étroite, connecteur mil 20 points |
|
|
XW2K-20G-T | Système de câblage d'interface à usage général avec technologie Push-In plus, connecteur MIL 20 points, entrée/sortie, 1 A, NPN/PNP, 125 VAC, 30 V c.c., montage horizontal et vertical sur rail DIN |
|
|
XW2Z-0100DD-L | Câble E/S, 1 m, entre MIL20 et MIL20, direct |
|
|
XW2Z-0100DL-L | Câble Entrées/Sorties, 1 m, entre MIL20 et fils libres |
|
|
XW2Z-0200DD-L | Câble E/S, 2 m, entre MIL20 et MIL20, direct |
|
|
XW2Z-0200DL-L | Câble E/S, 2 m, entre MIL20 et fils libres |
|
|
XW2Z-0500DL-L | Câble Entrées/Sorties, 5 m, entre MIL20 et fils libres |
|
|
XW2Z-100X | Câble 1 m entre bornier XW2B-20G4/G5 et CJ1W-NCx14 / x34 |
|
|
XW2Z-200X | Câble 2 m entre bornier XW2B-20G4/G5 et CJ1W-NCx14 / x34 |
|
|
XW2Z-RO50C | CABLE 50 CM |
|